Xerox Phaser 6125 Service Manual

I – 4 Phaser 6130 Color Laser Printer Service Manual
Index
insert error, 3-53
plug/jack locator
, 10-8
removal
, 8-8
replace error
, 3-71
Information pages
configuration, 1-24
demo
, 1-24
error history
, 1-27
job history
, 1-26
PCL fonts
, 1-25
PCL macros
, 1-25
PostScript fonts
, 1-26
Print Meter
, 1-27
insert fuser error
, 3-62
insert output to tray/MF
, 3-56
Interlock Harness
removal
, 8-54
Interlock Switch
location, 2-30
operation
, 2-32
troubleshooting
, 4-43
invalid ID
, 3-21
Invalid Job error
, 3-78
IP Board - See Image Processor Board
J
jam at tray error, 3-29
jam error
at exit, 3-44
at front cover
, 3-34, 3-42
at manual feed
, 3-37
at registration roll
, 3-46
jam at tray
, 3-29
job control functions
billing meters, 1-22
cancel print
, 1-20
forced output
, 1-20
ID print
, 1-22
IP filter
, 1-20
job recovery
, 1-20
job timeout
, 1-20
print volume management
, 1-20
RAM disk
, 1-20
K
K mode (see black and white mode), 2-40
K Mode Solenoid error
, 3-80
L
Laser Diode
location
, 2-24
operation
, 2-25
Laser Unit
components, 2-24
light quantity control, 2-34
location
, 2-24
operation
, 2-5, 2-24
plug/jack locator
, 10-9
removal
, 8-31
troubleshooting
, 3-76
wiring diagrams
, 10-22
LED indicators
, 1-7
Left Harness Assembly removal
, 8-26
Left Imaging Unit Restraint Block removal
, 8-39
Left Side Cover removal
, 8-17
load manual feed error
, 3-56, 3-57
load tray error
, 3-59, 3-60
low density YMCK error
, 3-54
LVPS
location, 2-30
operation
, 2-30
overcurrent protection
, 4-41
overvoltage protection
, 4-41
plug/jack locator
, 10-10
removal
, 8-55
troubleshooting
, 4-41
M
MACaddress error, 3-24
Macintosh
operating system, 1-11
troubleshooting
, 4-53
Main Drive Assembly removal
, 8-52
maintenance
preventive
, 7-2
RIP
, 7-3
tools
, 7-2
maintenance items
Fuser, 1-9
Fuser removal
, 8-9
Imaging Unit
, 1-9
imaging unit removal
, 8-8
removal
, 8-7
Separator Roller
, 1-9
separator roller removal
, 8-7
toner cartridge removal
, 8-10
Manual Feed
No Paper Sensor operation, 2-19
No Paper Sensor removal
, 8-28
Registration Sensor operation
, 2-19
MCU Board
communication error, 3-77
errors
, 3-74
firmware error
, 3-74
location
, 2-30
NVRAM error
, 3-75
operation
, 2-31
plug/jack locator
, 10-11
removal
, 8-59
Memory
location, 2-32
maximum
, 1-12
minimum
, 1-12

Xerox Phaser 6125 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	17 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Print speed (color, normal quality, A4/US Letter)	12 ppm
Internal memory	64 MB
Sound power level (standby)	25.7 dB
Sound pressure level (printing)	51.6 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Media weight (tray 1)	64 - 220 gsm
Paper tray media types	Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizes	Letter
Multi-Purpose Tray media weight	64 - 164 g/m²
Power requirements	240 V, 50/60 Hz
Networking features	10/100BaseTX
Power consumption (active)	280 W
Maximum duty cycle	40000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	50 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 85 %
Certification	CE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC

Weight and Dimensions

Dimensions (WxDxH)	400 x 394 x 389 mm