February, 2008
6-134
WorkCentre 5225, 5230
Hard Disk Diagnostic Program
Launch Version
General Procedures
Hard Disk Diagnostic Program
Purpose
NOTE: HDD initialization using the UI-Diagnostic is only for Partition A.
Procedure
1. Access Diagnostic Routines.
a. Enter UI Diagnostics (UI Diagnostic Mode).
2. Select Sub System.
3. Select Initialize Hard Disk and select Partition A.
4. Press the Start button and select Yes.
5. When Partition A has been initialized is displayed, select Confirm.
NOTE: After the above procedure, Partition A will be initialized.
To Next Page
Loading...
