February, 2008
2-166
WorkCentre 5225, 5230
016-228, 016-240
Launch Version
Status Indicator Raps
016-228 S2X Image Processing Error RAP
S2X failed in comparison of expected value of High-compression processing result obtained by
using Internal Test Pattern.
Initial Actions
Power Off/On
Procedure
Remove/insert SDRAM memory to check if it is securely mounted. If the problem continues,
replace S2X PWBA.
016-240 S2X NVM CheckSum Fail RAP
S2X failed in NVM Checksum test.
Initial Actions
Power Off/On
Procedure
Replace S2X PWBA. (NVM memory is loaded directly to Board.)
To Next Page
Loading...
Need help?
General
