Xerox WorkCentre 5225 Service Manual

February, 2008
2-179
WorkCentre 5225, 5230
016-351, 016-360
Status Indicator Raps
Launch Version
016-351 ESS SEEP-ROM Failure-2 RAP
W/R/V test error.
Initial Actions
Power Off/On
Procedure
Check SEEPROM connection for bent pins. Check Controller Board/BP Board Cable connec-
tions. If the problem continues, replace ESS PWB (PL 9.2).
016-360 ESS UI Failure-1 RAP
PCI Config space W/R/V test error.
Initial Actions
Power Off/On
Procedure
Remove/insert UI Card. If the problem continues, replace the UI Card.(PL xxx). If the problem
persists, replace ESS PWB (PL 9.2).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier