Xerox WorkCentre 5225

February, 2008
2-610
WorkCentre 5225, 5230
116-365, 116-366
Launch Version
Status Indicator Raps
116-365 Spool RAP
An internal shutdown occurred after an SPL processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 9.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).
116-366 Software Report RAP
An internal shutdown occurred after a reporting error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).