February, 2008
2-222
WorkCentre 5225, 5230
016-720, 016-722
Launch Version
Status Indicator Raps
016-720 PCL Command RAP
A PCL command error occurred during PCL processing.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.
016-722 Staple Position RAP
The job was cancelled when the Staple Position could not be determined.
Initial Actions
Ensure the staple position selection matches the available staple position in the finisher.
Procedure
Refer customer to following User Guide headings:
• [Image Rotation] - [Rotation Direction Screen]
To Next Page
Loading...
