February, 2008
2-35
WorkCentre 5225, 5230
003-761, 003-763
Status Indicator Raps
Launch Version
003-761 Incorrect Paper Tray Size RAP
When the Cover Content Tray or Separator + N set Tray is selected in Auto Paper Selection
the paper size is different from that in the Cover Tray or the Transparency Tray.
Procedure
The paper size in the tray selected by auto tray switching differs from the paper
size in the tray selected at the tray selection. Either change the paper size for
the tray, or change the paper type priority setting.
003-763 Adjustment Chart Not Found RAP
When Automatic Gradation Correction was executed, the patch for position detection on the
document was not available.
Procedure
Reposition the Automatic Gradation Correction Chart.
To Next Page
Loading...
Need help?
General
