Xerox WorkCentre 5225 Service Manual

February, 2008
2-37
WorkCentre 5225, 5230
003-795, 003-930
Status Indicator Raps
Launch Version
003-795 AMS Limit Error RAP
After auto document detection in Auto Reduce/Enlarge, the Reduce/Enlarge ratio did not fall
within the specified range (25%~400%).
Procedure
Ask customer to set the document size manually or change reduction/enlargement ratio.
003-930 300 DPI Scan RAP
Cannot scan over 300 DPI.
Procedure
Scan at 300 dpi or lower.

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier