Yamaha F115A - Chapter 5; Removing the Flywheel Magnet Assembly

5-2
POWR
E
FLYWHEEL MAGNET ASSEMBLY
CAUTION:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder may
easily slip off.
REMOVING THE FLYWHEEL MAGNET
ASSEMBLY
5
1. Remove:
• Flywheel magnet assembly nut
Å For USA and Canada
ı For worldwide
Flywheel magnet assembly
holder
YB-06139 / 90890-06522
5020
Å
5030
ı
2. Remove:
• Flywheel magnet assembly
Å For USA and Canada
ı For worldwide
CAUTION:
• Keep the nut side flush with the crank-
shaft end until the flywheel magnet
assembly comes off the tapered portion
of the crankshaft.
• To prevent damage to the engine or
tools, screw in the universal-puller set-
bolts evenly and completely so that the
universal-puller plate is parallel to the fly-
wheel magnet assembly.
Universal puller
YB-06117 / 90890-06521
5040
Å
5050
ı