Yamaha F115A - Removing the Drive Shaft; Disassembling the Drive Shaft Housing Assembly; Disassembling the Forward Gear Assembly

6-19
E
LOWR
DRIVE SHAFT (REGULAR ROTATION MODELS)
REMOVING THE DRIVE SHAFT 6
Loosen:
• Pinion nut
Drive shaft holder ..................... 1
YB-06151 / 90890-06519
Pinion nut holder ...................... 2
90890-06505
Pinion nut holder attachment . 3
90890-06507
6250
DISASSEMBLING THE DRIVE SHAFT
HOUSING ASSEMBLY
6
Remove:
• Needle bearing
Bearing/oil seal attachment .... 1
YB-06196 / 90890-06610
Driver rod .................................. 2
YB-06071 / 90890-06652
6260
DISASSEMBLING THE FORWARD
GEAR ASSEMBLY
6
1. Remove:
• Tapered roller bearing
CAUTION:
Do not reuse the bearing, always replace it
with a new one.
2. Remove:
• Needle bearing
Bearing separator
YB-06219 / 90890-06534
Slide hammer............................ 1
YB-06096
Guide plate................................ 2
90890-06501
Guide plate stand ..................... 3
90890-06538
Bearing puller............................ 4
90890-06535
Small universal claws .............. 5
90890-06536
6270
6280