EasyManua.ls Logo

Yamaha F115A - Checking the Timing Belt

Yamaha F115A
709 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-12
E
INSP
ADJ
POWER UNIT
4. Install:
Oil filter 3
NOTE:
Lubricate the rubber seal with engine oil
before installation.
T
R
.
.
Oil filter
18 Nm (1.8 m • kgf, 13.3 ft • lb)
3
3240
5. Add:
Engine oil
6. Install:
Oil filler cap
7. Check:
Engine oil level
Refer to “CHECKING THE ENGINE OIL
LEVEL” on page 3-11.
NOTE:
Run the engine for several minutes and
then check the engine oil level.
If the engine oil is still not within the
proper level, add/drain as needed.
Recommended engine oil
4 stroke motor oil
API: SE, SF, SG or SH
SAE: 10W-30, 10W-40
Oil quantity
with oil filter
4,700 cm
3
(159 US oz, 165 Imp oz)
without oil filter
4,500 cm
3
(152 US oz, 158 Imp oz)
3250
CHECKING THE TIMING BELT 3
Check:
Timing belt
Wear/damage Replace.
3260

Table of Contents

Other manuals for Yamaha F115A

Related product manuals