4-18
FUEL
E
PRESSURE REGULATOR
PRESSURE REGULATOR
4
REMOVING/INSTALLING THE PRESSURE REGULATOR
Order Job/Part Q’ty Remarks
Fuel rail Refer to “HIGH-PRESSURE FUEL LINE”
on page 4-8.
Before performing the following
procedure, reduce the fuel pressure
(high-pressure fuel line)
1 Hose clamp 1
2 Hose 1 (fuel cooler-to-pressure regulator)
3 Hose 1 (intake manifold-to-pressure regulator)
4 Screw 2
5 Pressure regulator 1
6 O-ring 1 1.8 × 8 mm
For installation, reverse the removal
procedure.
1
2
3
4
5
6
6 × 12 mm
4140
To Next Page
Loading...
