6-57
E
LOWR
SHIMMING (REGULAR ROTATION MODELS)
(FOR USA AND CANADA)
(2) Install the shimming gauge, bearing
1, and shim(s) 2.
NOTE:
If the original shim(s) is unavailable, start
with a 0.50-mm shim.
(3) Measure the specified measurement
(M).
Shimming gauge
YB-34446-1, -3, -5, -7
6810
2. Adjust:
• Shim thickness (T1)
Remove or add shim(s).
NOTE:
(M0) – (M) should be as close to “0” as pos-
sible.
Available shim thickness
0.10, 0.12, 0.15, 0.18, 0.30, 0.40
and 0.50 mm
To Next Page
