6-60
E
LOWR
SHIMMING (REGULAR ROTATION MODELS)
(FOR WORLDWIDE)
SHIMMING (REGULAR ROTATION MODELS) (FOR WORLDWIDE)
6
NOTE:
• There is no need to select shims when
reassembling with the original case and
inner parts.
• Shim calculations are required when reas-
sembling with the original inner parts and
a new case (the difference between the
original inner parts and the new case).
• Measurements and adjustments are
required when replacing the inner part(s).
6730
T3
B4
59.0
A3
A1 B2
T2
15.8
A234.0B1T1
F
R P
B3
To Next Page
