Yamaha F115A - Page 52

2-8
SPEC
E
MAINTENANCE SPECIFICATIONS
STARTING SYSTEM
Fuse 1 V-A 12-20
Fuse 2 V-A 12-30
STARTER MOTOR
Type Sliding gear
Output kW 1.4
Rating Second 30
Brushes
Standard length mm (in) 15.5 (0.61)
Wear limit mm (in) 9.5 (0.37)
Commutator
Standard diameter mm (in) 29.0 (1.14)
Wear limit mm (in) 28.0 (1.10)
Mica
Standard undercut mm (in) 0.5 - 0.8 (0.02 - 0.03)
Wear limit mm (in) 0.2 (0.01)
CHARGING SYSTEM
Lighting coil (W – W)
Output peak voltage lower
limit
@ cranking 1 V 9.3
@ cranking 2 V 7.4
@ 1,500 r/min V 37 (open circuit voltage)
@ 3,500 r/min V 89 (open circuit voltage)
Rectifier/regulator (R – B)
Output peak voltage lower
limit
@ cranking 1 V —
@ cranking 2 V —
@ 1,500 r/min V 12.5
@ 3,500 r/min V 13.0
POWER TRIM AND TILT
SYSTEM
Trim sensor
Resistance (P – B) Ω 582 - 873
Resistance (O – B) Ω 800 - 1,200
* Cranking 1: Open circuit voltage.
Cranking 2: Loaded circuit voltage.
Item Unit
Model
Worldwide F115AET FL115AET
USA F115TR LF115TR
Canada F115TR LF115TR