Yealink VC880 - Setting the Language; Configuring Key Tone; Configure the Time and Date

| Configuring Basic Settings | 103
2. Configure and save the following settings:
Parameter Description Configuration Method
Sitename Icon
Configure the site name of the
system.
Note: you can enter 64
characters at most.
Web user interface
Endpoint
CTP20
Setting the Language
You can specify a language displayed in the monitor and the web user interface respectively. The CP960
conference phone will detect and use the same language as the monitor.
Procedure
1. Do one of the following:
• On your web user interface, click Language at the top of the web page.
• On your VCS, go to More > Setting > Basic > Language.
On your VP59, tap Setting > Basic > Language.
• On your CTP20, tap Setting > Basic > Language.
2. Select the desired language.
3. Save the change.
Configuring Key Tone
You can enable the key tone feature. When you press any key on the remote control or tap the onscreen
dial pad on the CP960 conference phone, the system will produce a sound. For VP59, when you press any
key on the phone or tap any key on the Dial page, the device will produce a sound.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > General > General Information.
• On your VCS, go to More > Setting > Basic.
On your VP59, tap Setting > Basic.
• On your CTP20, tap Setting > Basic.
2. Enable/disable Key Tone.
Configure the Time and Date
Your system can obtain the time and date from SNTP (Simple Network Time Protocol) time server
automatically. You can also manually configure the time and date.
• Time Zone
• NTP Settings
• Configuring the DST
• Manually Configuring the Time and Date
• Customizing the Time and Date Format