Yealink VC880 - Rejecting and Ending Calls; Local Video Conference Management

| Configuration Methods | 40
Parameter Description Configuration Method
User Password (New Password
and Confirm Password)
Configure a user password.
Note: the system supports ASCII
characters 32-126 (0x20-0x7E).
You can also leave the password
blank.
Web user interface
Using VCR11 Remote Control
You can use the real remote control or the virtual remote control to configure and use the system. You can
disable the remote control if it is not needed or not available.
VCR11 Remote Control is not applicable to VP59.
• Using the Virtual Remote Control
• Customizing the Key Type
• Disabling Remote Control Keys
• Disabling the Remote Control
Using the Virtual Remote Control
You can use the virtual remote control via your web user interface to control your system.
Procedure
1. On your web user interface, go to Home > Remote Control.
The virtual remote control appears.
2. Click the corresponding keys on the remote control to control the system.
3. Click Remote Control to close the virtual remote control.
Customizing the Key Type
You can configure the custom key ( ) on the remote control to the desired functions as needed.
Procedure
1. On your web user interface, go to Setting > Remote Control > Remote Control > Custom Key Type.