Yealink VC880 - Configuring Call Settings

| Configuring Call Settings | 174
2. Configure and save the following settings:
Parameter Description Configuration Method
VMR Name 1 to 5
Specify the name of the virtual
meeting room .
Note:
• The VMR name 1 is Zoom by
default.
• The VMR name 1 is BlueJeans
by default.
• The VMR name 3 to 5 is
empty by default.
It only works when you do not
log into a Cloud platform, or
you only register a Yealink Cloud
account/YMS account.
Web user interface
VMR Server 1 to 5
The IP address or the domain
name of the VMR server.
Note:
• The VMR server 1 is
zoomcrc.com by default.
• The VMR server 2 is bjn.vc by
default.
• The VMR server 3 to 5 is
empty by default.
It only works when you do not
log into a Cloud platform, or
you only register a Yealink Cloud
account/YMS account.
Web user interface
The dialing screen on your web user interface and the monitor will appear the configured VMR. You
can select the desired VMR from the pull-down menu, and then enter the conference ID to call the
corresponding VMR.
Configuring Call Settings
• Selecting a Call Protocol
• Specifying the Video Call Rate
• Account Polling
• Configuring Additional Audio Call
• Selecting the Multi-party Resources
• Configuring Call Match
• Search Source List in Dialing
• Configuring SIP IP Call by Proxy
• Configuring Ringback Timeout
• Configuring the Auto Refuse Timeout