Yealink VC880 - Network Speed and Duplex Mode; Supported Transmission Methods; Configuring Transmission Methods

| Configuring Network Settings | 72
Network Speed and Duplex Mode
You can configure the network speed and duplex mode for the system. The network speed and duplex
mode you select for the system must be supported by the switch.
VP59 allows you to configure the speed of Internet port and PC port.
• Supported Transmission Methods
• Configuring Transmission Methods
Supported Transmission Methods
The supported transmission methods for VC880/VC800/VC500/PVT980/PVT950 system’s Internet port are
listed below:
• Auto
• Full Duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)
• Half Duplex (transmit in 10Mbps or 100Mbps)
The supported transmission methods for VC200 endpoint’s Internet port are listed below:
• Auto
• Full Duplex (transmit in 10Mbps or 100Mbps)
• Half Duplex (transmit in 10Mbps or 100Mbps)
The supported transmission methods for VP59 are listed below:
• WAN Port Link
• Auto Negotiation
• Full Duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)
• Half Duplex (transmit in 10Mbps or 100Mbps)
• PC Port Link
• Auto Negotiation
• Full Duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)
• Half Duplex (transmit in 10Mbps or 100Mbps)
Configuring Transmission Methods
Procedure
1. On your web user interface, go to Network > Advanced > Port Link.
For VP59, on your web user interface, go to Network > Advanced > Port Link.