Yealink VC880 - Turning Off Local Camera

| Configuration Methods | 38
2. Configure and save the following settings:
Parameter Description Configuration Method
HTTP
Enable or disable the user to access the web
user interface via the HTTP.
Default: On.
Web user interface
Endpoint
CTP20
HTTP Port
Specify the HTTP port for the user to access the
web user interface.
Valid value: Any integer from 1 to 65535.
Make sure that the configured port is available.
Default: 80
Web user interface
HTTPS
Enable or disable the user to access the web
user interface by using the HTTPS.
Default: On.
Web user interface
Endpoint
CTP20
HTTPS Port
Specify the HTTPs port for the user to access the
web user interface.
Valid value: Any integer from 1 to 65535.
Make sure that the configured port is available.
Default: 443
Web user interface
HTTP & HTTPS
Enable or disable the user to access the web
user interface via the HTTP and HTTPS.
Default: On.
CTP20
Endpoint (VP59)
Disabled Disable the user to access the web user interface
via the HTTP and HTTPS.
Default: Disabled.
CTP20
Endpoint (VP59)
User and Administrator Account Login
You can configure the system features via the web user interface as an administrator or a user. For an
administrator, you can configure all settings; for a user, you can only configure some basic settings and
contact settings.
• Configuring an Administrator Password
• Enabling the User Role