Yealink VC880 - Basic Settings for the CP960 Conference Phone; Adjusting Backlight of the CP960 Conference Phone; Setting the Screen Saver for CP960 Conference Phone; Configuring the Audio Settings

| Configuring the Audio Settings | 123
Basic Settings for the CP960 Conference Phone
The screen saver automatically starts when the system or CP960 conference phone has been idle for the
preset waiting time. You can set screen saver for the monitor and CP960 conference phone respectively.
• Adjusting Backlight of the CP960 Conference Phone
• Setting the Screen Saver for CP960 Conference Phone
Adjusting Backlight of the CP960 Conference Phone
You can change the backlight brightness of the CP960 conference phone. The backlight time means the
delay time to turn off the backlight when the phone has been idle for a specified time.
About this task
You can configure the backlight time as one of the following types:
• Always On: the backlight is turned on permanently.
• Specific time: the backlight is turned off when the phone has been idle for a specified time.
Procedure
Do one of the following:
• On your web user interface, go to Setting > General > General Information > Backlight Time.
• On your CP960 conference phone, tap Setting > Display > Backlight.
• On your CP960 conference phone, swipe down from the top of the screen to enter the control center.
Drag the backlight slider.
Setting the Screen Saver for CP960 Conference Phone
The screen saver automatically starts when CP960 conference phone has been idle for the preset waiting
time. You can set screen saver for the CP960 conference phone. The CP960 conference phone supports four
types of screen savers: Clock, Colors, Photo Frame and Photo Table. You can choose anyone you like, and
you can configure the waiting time before the CP960 conference phone starts the screen saver.
Procedure
1. On your CP960 conference phone, go to Setting > Display > Screen Saver.
2. select the corresponding screen saver type.
3. Configure and save the following settings:
Parameter Description Configuration Method
Wait Time
Configure the inactive time
(minutes) before the CP960
conference phone starts screen
saver.
Default: 10 minutes.
CP960 Conference Phone
Configuring the Audio Settings
• Configuring the Audio Output