Yealink VC880 - Maximizing Monitor Video Display

| Configuring Video Settings | 146
2. Configure and save the following settings:
Parameter Description Configuration Method
Output For Display 2
Specify the content to be
displayed on the secondary
monitor.
• Auto—The secondary monitor
displays the content in this
priority: PC>VC880/VC800/
VC500/PVT980/PVT950
Camera>Camera N.
• PC—The secondary monitor
displays the PC content.
• VC880/VC800/VC500/
PVT980/PVT950 Camera—The
secondary monitor displays
the video images from the
local camera.
• Camera N—The secondary
monitor displays the video
images from the connected
camera N.
Note: the default value is Auto.
After you specify “Output for
Display 2”, you can still modify
the content to be displayed
on the secondary monitor
temporarily during a call by
using the “Focus” feature. But
the next time you establish a
call, the content to be displayed
on the secondary monitor is
controlled by the “Output For
Display 2” .
Web user interface
Maximizing Monitor Video Display
Your monitor may not display the entire HD image. To solve this problem, you can adjust the monitor to
display an entire HD image manually. This feature is not applicable to VP59.
Procedure
1. Do one of the following:
• On your VCS, go to More > Setting > Basic > Display.
• On your CTP20, tap Setting > Basic > Display.
2. Adjust the monitor display.
3. Save the change.