Yealink VC880 - Logging into Videxio Platform

| Configuring Account Settings | 99
Parameter Description Configuration Method
Server Expires
The registration timeout (in
seconds) of the device.
After the timeout, the device will
send the registration request to
the server again.
Default: 3600 seconds.
Web user interface
Keep Alive Interval
Configure the interval (in
seconds) that the device sends
keep-alive messages to the SIP
server, so that the SIP server can
remain connected to the device.
Default: 30 seconds.
Web user interface
Logging into Videxio Platform
You can log into Videxio platform and Videxio accounts will be automatically logged into the devices.
Videxio platform is not applicable to VP59.
About this task
When you place a call using the Videxio account, you can:
• Dial Videxio accounts to establish a point-to-point call.
• Dial third-party accounts registered in the Videxio platform to establish a point-to-point call.
• Call into the Virtual Meeting Room to join the video conference with other devices.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > VC Platform.
• On your VCS, go to More > Setting > Advanced > Video Conference Platform.
• On your CTP20, go to Setting > Advanced > Video Conference Platform.
2. Configure and save the following settings:
Parameter Description Configuration Method
Cloud Account
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into the
Videxio platform.
Web user interface
Endpoint
CTP20
Platform Type Select Videxio.
Web user interface
Endpoint
CTP20