Yealink VC880 - DND (Do Not Disturb); Enabling DND When Not in a Call; Enabling DND During an Active Call

| Configuring Call Settings | 183
Procedure
1. On your web user interface, go to Setting > Call Features.
2. Enable or disable Auto Dialout Mute.
3. Save the change.
DND (Do Not Disturb)
You can enable do not disturb feature to reject incoming calls automatically. All calls you reject will be
logged to Missed Calls list.
• Enabling DND when Not in a Call
• Enabling DND during an Active Call
Enabling DND when Not in a Call
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features.
• On your VCS, go to More > Setting > Call Features.
On your VP59, tap > DND.
• On your CP960, swipe down from the top of the screen to enter the control center.
• On your CTP20, tap Setting > Basic > DND.
2. Enable/ Disable DND.
3. Save the change.
Enabling DND during an Active Call
To prevent callers from interrupting the active call, you can enable DND during an active call. The DND
feature will be disabled automatically after the call ends.
Procedure
Do one of the following during a call:
• On your web user interface, go to Home > DND.
• On your VCS:
For VC880/VC800/VC500/VC200/PVT980/PVT950, on your remote control, press or OK key to
open Talk Menu, and then select DND.
On your VP59, tap > DND.
• On your CP960, go to More > DND.
•
On your CTP20, tap > DND.