| Getting Started | 32
LED Status Description
Fast flashing red
(0.3s)
The phone is ringing.
Slowly flashing
red (1s)
The phone receives a missed call.
Solid red for 0.5s
and off for 3s
alternately
The phone is in power-saving mode.
Camera Indicator LED of VP59
LED Status Description
Solid green The phone is powered on and the camera is available.
The camera is idle.
The phone receives an audio-only call.
Fast flashing
green
The phone receives a video call.
Solid red There is an active video call.
Slowly flashing
red
The shutter switch is open, but the local video is disabled during a video call.
Off The phone is powered off.
The camera is not properly connected to the phone.
The shutter switch is closed.
LED Instructions of VCC22 Video Conferencing Camera
LED Status Description
The VC880/VC800/PVT980 system is powered on.
The VC880/VC800/PVT980 is upgrading firmware.
Solid green
The VCC22 video conferencing camera is working.
The VC880/VC800/PVT980 system is in sleep mode.
Solid red
The VCC22 video conferencing camera is disabled.
Flashing red The VCC22 video conferencing camera is upgrading firmware.
Solid orange The VCC22 video conferencing camera is not selected.
Off The VCC22 video conferencing camera is not connected to the PoE switch.
To Next Page
Loading...
