| Configuring Account Settings | 86
Configuring the PSTN account
PSTN box CPN10 is used to connect video conferencing system to the PSTN (Public Switched Telephone
Network). It is a cost-effective solution for PSTN office. Up to 2 cascaded PSTN Boxes can be connected to
video conferencing systems, which allow you to experience the conference conveniently in excellent speech
quality with PSTN. For more information, refer to Yealink PSTN Box CPN10 Quick Start Guide. After PSTN is
connected, you can take the PSTN as one audio and use the PSTN to join the conference mixing with the
audio and video.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > PSTN Account.
• On your VCS, go to More > Setting > Advanced > PSTN Account.
On your VP59, go to Setting > Advanced > PSTN Account.
• On your CTP20, go to Setting > Advanced > PSTN Account.
2. Configure and save the following settings:
Parameter Description Configuration Method
Account Active/PSTN Account
X
Enable or disable the PSTN
account X.
Default: On. X=1-2.
Web user interface
Endpoint
CTP20
Label/PSTN Account Label Configure the PSTN account
label.
Web user interface
Endpoint
CTP20
Configuring the Video Conference Platform Account
You can log into the following video conference platform:
• Yealink VC Cloud
• Yealink Meeting Server
• StarLeaf
• Zoom
• Pexip
• BlueJeans
• EasyMeet
• Videxio (it is not applicable to VP59)
• Custom
Note:
If you purchase the VC200 Custom Edition for Yealink Cloud, your endpoint can register a Yealink
Cloud account only. Other Cloud platforms are unavailable on your endpoint. What’s more, you
cannot register a SIP account or H.323 account, and cannot dial an IP address.
• Registering a Yealink Cloud Account
• Registering a YMS Account
• Registering a StarLeaf Account
To Next Page
Loading...
