Yealink VC880 - Joining the VMR; Configuring the Third-Party Virtual Meeting Room

| Configuring the Meeting Room | 173
Parameter Description Configuration Method
Virtual Meeting Room 2 >
Password
Configure the password for
virtual meeting room 2.
Valid Value: 1 to 10, default
value: blank.
Only when the meeting room
type is VMR mode can this
parameter be configured.
Web user interface
Related information
Joining the VMR
Conference Types
Joining the VMR
If the virtual meeting room requires no password, dial IP address or account to enter the virtual meeting
room.
If the virtual meeting room requires a password, dial IP##meeting password or meeting password@IP to
enter the virtual meeting room.
Example:
• The IP address of the moderator is 10.3.6.201.
• The meeting password for virtual meeting room 1 is 123.
• The meeting password for virtual meeting room 2 is 456.
Participants can dial 10.3.6.201##123 or 123@10.3.6.201 to enter the virtual meeting room 1.
Participants can dial 10.3.6.201##456 or 456@10.3.6.201 to enter the virtual meeting room 2.
Without a meeting password or with a wrong meeting password, the call will fail.
Configuring the Third-party Virtual Meeting Room
A Virtual Meeting Room (VMR) is an online space, typically hosted by a Cloud-service provider, where
multiple participants can join. Participants usually join by dialing a specific number or an address with a
simple name like zoomcrc.com.
About this task
If you do not register a Cloud account, or you only register a Yealink Cloud account or YMS account, you
can configure a third-party VMR (StarLeaf/Zoom/BlueJeans/Pexip/EasyMeet/Videxio Platform) in advance,
so that you can quickly join a VMR without registering a third-party Cloud account.
Up to 5 third-party VMRs can be configured.
Note: Third-party virtual meeting room is not available on VC200 Custom Edition for Yealink Cloud.
Procedure
1. On your web user interface, go to Setting > 3rd Party VMR.