Yealink VC880 - Configuring Camera Settings; Selecting and Setting Cameras

| Configuring Camera Settings | 152
Parameter Description Configuration Method
Automatic Content Sharing (it
is not applicable to VP59)
Configure whether to enable
PC presentation on the system
when the content is sharing.
Default: On.
Web user interface
Frame Configure the maximum frame
rate when the content is sharing.
• 5 fps
• 15 fps
• 30 fps
Default: 15 fps.
Web user interface
Resolution Configure the maximum
resolution when the content is
sharing.
• 1080P
• 720P
Default: 1080P.
Web user interface
Configuring Camera Settings
You can configure the following settings on VC880/VC800/VC500/VC200/PVT980/PVT950.
• Selecting and Setting Cameras
• Viewing Camera Status
• Adjusting Camera Angle and Focus
• Adjusting the White Balance
• Adjusting the Exposure
• Adjusting Display Image of the Camera
• Adjusting Hangup Mode and Camera Pan Direction
• Configuring Continuous Auto Focus
• Setting the Camera Presets
• Allowing the Remote System to Control Your Camera
• Reset Camera
Selecting and Setting Cameras
You can select a camera, enable or disable the selected camera, or customize the camera name. This feature
is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting Camera .