| Getting Started | 15
Port Name Description
③ USB
• Connect to a USB flash drive.
Insert a USB flash drive for storing
screen shots, the recorded videos
and captured packets. If multiple USB
flash drives are connected, only the
last one can be identified.
• Insert a WF50 Wi-Fi USB Dongle for
connecting to Wi-Fi or providing
wireless AP.
• Insert a BT42 Bluetooth USB Dongle
for connecting to the CPW90-BT
Bluetooth wireless microphones.
• Insert a PSTN box CPN10 for
connecting to the PSTN (Public
Switched Telephone Network).
④ VC Hub/Phone
• For wired content sharing, connect
this port to the Codec port on the
VCH50 video conferencing hub.
• If you need an audio device, connect
this port to the Internet port on the
CP960 Conference phone.
• Connect to VCM34.
⑤ HDMI Connect to a monitor.
⑥ Internet Connect to the network device.
⑦ DC48V Connect to the power source via a
power adapter.
⑧ Reset Key Reset the system to factory defaults.
⑨ Security Slot Allow you to connect a universal
security cable to the codec, so you can
lock the codec down. The system cannot
be removed when locked.
Hardware of VC500/PVT950 Codec
VC500/PVT950 codec compresses outgoing video and audio data, transmits this information to the far site,
and decompresses incoming data.
VC500/PVT950 codec, compatible with different audio devices, supports 16:9 and 4:3 aspect ratios and can
adapt to the monitors automatically. The VC500/PVT950 camera can be panned (± 30 degrees range), tilted
(± 20 degrees range) and support 5 x optical zoom, white balance and automatic gain.
To Next Page
Loading...
