| Managing the Directory | 191
Abbreviation Name Description
ipPhone IPphoneNumber The home phone number
Configuring LDAP
Procedure
1. On your web user interface, go to Directory > LDAP.
2. Configure and save the following settings:
Parameter Description Configuration Method
LDAP Enable
Enable or disable the LDAP
feature on the system.
Default: Disabled.
Web user interface
LDAP Name Filter
Configure the name attribute for
LDAP searching.
Example: (|(cn=%)(sn=%))
Web user interface
LDAP Number Filter
Configure the number attribute
for LDAP searching.
Example: (|(telephoneNumber=
%)(mobile=%))
Web user interface
LDAP TLS Mode
Configure the connection mode
between the LDAP server and
the system.
• LDAP—Unencrypted
connection between LDAP
server and the system (port
389 is used by default).
• LDAP TLS Start- TLS/SSL
connection between LDAP
server and the system (port
389 is used by default).
• LDAPs- TLS/SSL connection
between LDAP server and the
system (port 636 is used by
default).
Default: LDAP
Web user interface
LDAP Server Address Configure the domain name
or the IP address of the LDAP
server.
Web user interface
Port
Configure the LDAP server port.
Default: 389.
Web user interface
To Next Page
Loading...
