Yealink VC880 - Hardware of VCC22 Video Conferencing Camera

| Getting Started | 21
Name Description
14 Hookswitch
• Picking up the handset from the handset cradle, the hookswitch bounces
and the phone connects to the line.
• Laying down the handset on the handset cradle, the phone disconnects from
the line.
15 Shutter Switch Covers or uncovers the camera. When the camera is switched off, the video
image turns to be black.
16 Camera Indicator
LED
Indicates the status of video call and camera:
• Receives a video call—Flashing green
• The camera is inserted and detected successfully on the phone—green
17 Camera Lens Two mega-pixel camera. The optimal object distance should be from 0.35m (1
foot) to 2m (6 feet).
18 HDMI Connect to a monitor for displaying video image.
19 USB 2.0 Port Connect to a USB flash drive/WPP20/CPN10/USB to Line output.
Hardware of VCC22 Video Conferencing Camera
VCC22 is a video conferencing camera for VC880/VC800/PVT980. It adopts 12x optical zoom lens, supports
1080P/60 frame full HD video, has OSMO and PTZ function, and possesses professional video quality and
environmental adaptability. You can connect up to 9 VCC22 video conferencing cameras to the VC880/
PVT980 video conferencing system, and 8 to VC800 video conferencing system.
The VCC22 camera can be panned (± 100 degrees range), tilted (± 30 degrees range) and supports 12 x
optical zoom, white balance and automatic gain.
• Front Panel of VCC22 Video Conferencing Camera
• Rear Panel of VCC22 Video Conferencing Camera
Front Panel of VCC22 Video Conferencing Camera
The LED indicator in front of the camera indicates different camera statuses.