| Configuring the Meeting Room | 171
VMR Mode Conference
In VMR mode conference, MCU can be used to host two independent conferences, corresponding to virtual
meeting room 1 and virtual meeting room 2. This feature is only applicable to VC800/VC880/PVT980. You
cannot use the VMR mode conference when multiple cameras are connected.
• If you import an 8-way multipoint license to the VC800/VC880/PVT980, X+Y<=8. Virtual meeting room
1 and virtual meeting room 2 support up to 8-way video call.
• If you import a 16-way multipoint license to the VC800/VC880/PVT980, X+Y<=16. Virtual meeting room
1 and virtual meeting room 2 support up to 16-way video call.
• If you import a 24-way multipoint license to the VC800/VC880/PVT980, X+Y<=24. Virtual meeting room
1 and virtual meeting room 2 support up to 24-ways video call.
For more information on how to set meeting password for virtual meeting room 1 and virtual meeting
room 2, refer to Configuring Meeting Password .
Note:
When you import an 8 or 16-ways multipoint license to the VC800/VC880/PVT980, virtual meeting
room 1 provides additional 5 voice calls.
• Selecting VMR Mode Conference
Selecting VMR Mode Conference
VMR mode conference provides virtual meeting room 1 and 2. You can allocate the MCU ways between
two virtual meeting rooms respectively.
Procedure
1. On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.
2. Select VMR Mode from the Conference Type drop-down menu.
To Next Page
Loading...
