Yealink VC880 - Importing bin Files to the System; Rebooting the System; Resetting the SD Card of VC200;VP59; Resetting the System

| System Maintenance | 221
2. Click Export.
Importing BIN Files to the System
Procedure
1. On your web user interface, go to Setting > Configuration > Configuration > Import Configuration.
2. Click Browse and select a BIN configuration file from your computer.
3. Click Import to import the configuration file.
Rebooting the System
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Upgrade > Reboot.
• On your VCS, go to More > Setting > Advanced > Reboot & Reset > Reboot.
On your VP59, Setting > Advanced > Reboot & Reset > Reboot.
• On your CTP20, tap Setting > Advanced > Reboot & Reset > Reboot.
It prompts whether you are sure reboot.
2. Confirm the action.
Resetting the SD Card of VC200/VP59
You can reset SD card (local storage) of VC200/VP59 to clear all captured screenshots and recorded videos.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Upgrade > Reset Built-in SD Card.
• For VC200, go to More > Setting > Advanced > Reboot & Reset > Reset Built-in SD Card.
On your VP59, Setting > Advanced > Reboot & Reset > Reset Built-in SD Card.
• On your CTP20, tap Setting > Advanced > Reboot & Reset > Reset Built-in SD Card.
The page prompt whether or not you are sure to reset.
2. Confirm the action.
Resetting the System
Generally, some common issues may occur while using the system. You can reset your system and camera
to factory after you have tried all troubleshooting suggestions.
• Resetting the System via Configuration Methods
• Resetting the System by using Reset Button
• Resetting VP59 by REDIAL key