| System Maintenance | 220
Procedure
1. In the note toolbar, tap > Save/Share.
2. Do one of the following:
• Tap Save to cloud disk to save the whiteboard to the YMS server.
• Tap Send E-mail, enter the email address and then tap Send to share whiteboard via email.
Multiple email addresses are separated by commas (half-width, full-width) or semicolons (half-width,
full-width).
• Tap Clink to get qrcode.
Other person can access the whiteboard image by scanning the QR code and entering the provided
access password within a limited period of time.
Related tasks
Importing the Whiteboard Source File via WPP20
Using VCM34
To further improve the sound quality, you can connect a VCM34 to the VCS codec. If you need to expand
the pickup range, you can connect multiple VCM34s in cascade (up to 4 VCM34s). VP59 cannot be used
with a VCM34. For more information, refer to Yealink_VCM34_Quick_Start_Guide.
System Maintenance
The following topics describe system maintenance, such as how to set up a system profile, perform a
factory restore, and upgrade the system firmware.
• Exporting or Importing Configuration Files
• Rebooting the System
• Resetting the SD Card of VC200/VP59
• Resetting the System
• Exporting Log Files
• Capturing Packets
• System Firmware
• Viewing Multipoint License Status
• Viewing the Device Type
Exporting or Importing Configuration Files
You can export the configuration files to check the current configuration of the system and to troubleshoot
if necessary. You can also import configuration files for a quick and easy configuration. The format of the
imported configuration file must be “*.bin”.
• Exporting BIN Files from the System
• Importing BIN Files to the System
Exporting BIN Files from the System
Procedure
1. On your web user interface, go to Setting > Configurations > Configuration > Export Configuration.
To Next Page
Loading...
