| Getting Started | 11
• Yealink WPP20 Wireless Presentation Pod Quick Start Guide, which describes how to connect WPP20
wireless presentation pod to the VCS codec.
• Yealink PSTN Box CPN10 Quick Start Guide, which describes how to connect VCS codec to PSTN.
• Yealink VCC22 Video Conferencing Camera Quick Start Guide, which describes how to connect the
VCC22 video conferencing cameras to VCS codec.
• Yealink CTP20 Quick Start Guide, which describes how to connect CTP20 to the VCS codec.
• Yealink VCM34 Quick Start Guide, which describes how to connect VCM34 to the VCS codec.
You can download these documentations online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
For support or service, please contact your Yealink reseller or go to Yealink Technical Support online:
http://support.yealink.com/.
Getting Started
This chapter introduces the basic operation of VCS.
• Hardware Overview
• LED Instructions
• Powering on and off
Hardware Overview
• Hardware of VC880 Codec
• Hardware of PVT980 Codec
• Hardware of VC800 Codec
• Hardware of VC500/PVT950 Codec
• Hardware of VC200 Codec
• Hardware of VP59 Codec
• Hardware of VCC22 Video Conferencing Camera
• Hardware of VCH50 Video Conferencing Hub
• Hardware of CP960 Conference Phone
• Introduction of CTP20 Touch Panel
• Hardware of WPP20 Wireless Presentation Pod
• Hardware of CPE90 Wired Expansion Microphones
• Hardware of CPW90-BT Bluetooth Wireless Microphone
• Hardware of VCR11 Remote Control
• Hardware of VCM34
• Hardware of MSpeaker
Hardware of VC880 Codec
With rich physical interfaces for audio and video connection, VC880 can be connected to the 3rd-party
camera or access to the video matrix. In addition, it comes with the professional RCA-in/out interface that
integrates the mixer with the gooseneck microphone. Its spilt-type structure can meet the deployment
requirement of the control room which separates from a large conference room.
The following introduces the corresponding ports on VC880.
To Next Page
Loading...
