| Getting Started | 12
Port Name Description
① LED Indicator Indicate different status of the system.
② Reset Key
Reset the system to factory defaults.
③ USB
• Connect to a USB flash drive.
Insert a USB flash drive for storing screenshots, recording videos or
capturing packets. If multiple USB flash drives are connected, only the
last one can be identified.
• Insert a WF50 Wi-Fi USB Dongle for connecting to Wi-Fi or providing
wireless AP.
• Insert a BT42 Bluetooth USB Dongle for connecting to the CPW90-BT
Bluetooth wireless microphones.
• Insert a PSTN box CPN10 for connecting to the PSTN (Public Switched
Telephone Network).
④ Camera Port Connect to a third-party camera.
⑤ RCA In Connect to an audio input device via a RCA cable.
⑥ RCA Out Connect to an audio output device via a RCA cable.
⑦ Display Connect to a monitor for video images output.
⑧ VC Hub/Camera
• For wired content sharing, connect this port to the Codec port on the
VCH50 video conferencing hub.
• Connect this port to the Camera port on the VCC22 video conferencing
camera.
• If you need an audio device, connect this port to the Internet port on the
CP960 Conference phone.
• Connect to VCM34.
⑨ Internet Connect to the network device.
⑩ DC48V Connect to the power source via a power adapter.
⑪ Security Slot Allow you to connect a universal security cable to the codec, so you can lock
the codec down. The system cannot be removed when locked.
To Next Page
Loading...
