Yealink VC880 - Configuring Continuous Auto Focus

| Configuring Camera Settings | 166
Parameter Description Configuration Method
Camera Pan Direction
Configure the pan direction of
the camera.
• Normal
• Reversed
If the camera reversed mode
is enabled, the camera pan
direction will be reversed when
pressing the left and right
navigation keys on the remote
control. In this case, you can
set the camera pan direction to
Reversed.
Default: Normal.
Web user interface
Endpoint
CTP20
Reset Camera
Web user interface
Endpoint
CTP20
Configuring Continuous Auto Focus
If you want to make the camera focus on the moving object automatically, you can enable this feature. If
you want a fixed focal length for presentation, for example, the class, you can disable this feature. It is not
available to VC200/ VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Focus.
• For VC880/VC800/VC500, go to More > Setting > Camera Setting.
• On your CTP20, tap Setting > Camera.
2. Configure and save the following settings:
Parameter Description Configuration Method
Continuous Auto Focus
Enable or disable continuous
auto focus.
Default: On.
Web user interface
Endpoint
CTP20