Yealink VC880 - Configuring Manual Exposure Mode

| Configuring Camera Settings | 157
Parameter Description Configuration Method
WDR/Wide Dynamic Range
Off or Specify the WDR.
The value represents the
compression degree of the
dynamic range
Cameras with WDR technology
can work perfectly both in the
bright and the dark conditions
and present clear images that
balances different lighting, so
that you can identify the details.
• Off-do not use WDR.
• 1~5
Default: 2.
Web user interface
Endpoint
CTP20
Metering
Configure the value of metering.
• Average
• Central
• Bottom
• Top
Default: Average.
Web user interface
Endpoint
CTP20
Configuring Manual Exposure Mode
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Exposure.
• On your VCS:
On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.
On your VC200, go to More > Setting > Video & Audio > Exposure.
• On your CTP20, tap Setting > Camera > Exposure.
2. Select Manual from the Exposure drop-down menu.
3. Configure and save the following settings:
Parameter Description Configuration Method
Aperture
Configure the value of aperture.
• Off
• F1.6, F2.0, F2.4, F2.8, F3.4, F4, F4.8, F5.6,
F6.8, F8, F9.6, F11, F14
Default: F3.4.
Web user interface
Endpoint
CTP20