| Configuring Video Settings | 144
Parameter Description Configuration Method
Full Screen Round Switches all video images
(except for the active speaker
and the content) at a time.
Web user interface
Configuring Preview Local
If there is no local screen in the current layout (such as remote full screen or split mode does not display
local), the local thumbnail image cannot be viewed when adjusting the local camera, so the camera cannot
be accurately adjusted. If you enable preview local, when there is no local screen in the current layout,
the local small window is superimposed in the lower right corner of the screen when you adjust the local
camera. After no PTZ operation within five seconds, the local thumbnail image disappears.
Procedure
1. On your web user interface, go to Setting > Call Features > Layout.
2. Configure and save the following settings:
Parameter Description Configuration Method
Preview Local
Enable or disable to view the
local thumbnail image by
adjusting camera when there is
no local screen in the current
layout.
• On-You can view the local
thumbnail image when you
adjust the camera.
• Off-You can not view the
local thumbnail image when
you adjust the camera.
Default: On.
Web user interface
Changing the Video Input Source
Your system supports camera and PC video input source. If you do not share the contents during the call,
the video input source is camera by default; if not, switch the video input source to Camera+PC to zoom
in the screen. You can change the video input source and select the content to be displayed on the screen.
This feature is not applicable to VP59.
Procedure
Do one of the following during a call:
• On your web user interface, go to Home > Input Choose.
•
On your remote control, press or OK key to open Talk Menu, and select Input Choose.
• If you select PC, the remote video image is shown in big size, and the PC content is shown in small
size (Picture-in-Picture).
• If you select Camera+PC, the PC content is shown in big size, and other video images are shown in
small size.
• If you select Camera, the remote video image is shown in big size, and the local video image is
shown in small size (Picture-in-Picture).
To Next Page
Loading...
