Yealink VC880 - NTP Settings

| Configuring Basic Settings | 106
Time Zone Time Zone Name Time Zone Time Zone Name
+01:00 Chad +10:00 Australia (Brisbane)
+01:00 Spain (Madrid) +10:00 Australia (Hobart)
+01:00 Croatia (Zagreb) +10:00 Russia (Vladivostok)
+01:00 Czech Republic (Prague) +10:30 Australia (Lord Howe
Islands)
+01:00 Denmark (Kopenhagen) +11:00 New Caledonia
(Noumea)
+01:00 France (Paris) +11:00 Russia (Srednekolymsk
Time)
+01:00 Germany (Berlin) +11:30 Norfolk Island
+01:00 Hungary (Budapest) +12:00 New Zealand
(Wellington, Auckland)
+01:00 Italy (Rome) +12:00 Russia (Kamchatka Time)
+01:00 Luxembourg
(Luxembourg)
+12:45 New Zealand (Chatham
Islands)
+01:00 Macedonia (Skopje) +13:00 Tonga (Nukualofa)
+01:00 Netherlands
(Amsterdam)
+13:30 Chatham Islands
+01:00 Namibia (Windhoek) +14:00 Kiribati
NTP Settings
You can set a NTP time server for the desired area as required. The NTP time server address can be offered
by the DHCP server or configured manually.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Date&Time.
• On your VCS, go to More > Setting > Basic > Date & Time.
On your VP59, tap Setting > Basic > Date & Time.
• On your CTP20, tap Setting > Basic > Date & Time.
2. Configure and save the following settings:
Parameter Description Configuration Method
Manual Time/Time Type Select Off/SNTP Setting to
obtain the time and date from
the NTP server automatically.
Web user interface
Endpoint
CTP20