| Configuring Call Settings | 182
Answering Multiple Calls Automatically
You can specify whether to answer a call automatically when the system is already in a call.
Before you begin
Make sure the auto answer is enabled.
About this task
Attention: Auto answer feature may create security issues, for example, an unexpected caller can
view your video conference room randomly.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features.
• For your VC880/VC800/VC500/VC200/PVT980/PVT950, on your remote control user, go to More >
Setting > Call Feature.
• On your CP960, swipe down from the top of the screen to enter the control center.
• On your CTP20, tap Setting > Basic.
2. Enable or disable Auto Answer Multiway.
3. Save the change.
Muting Auto-Answered Calls
The Auto Answer Mute feature avoids the caller hearing the local conversation freely when an incoming call
is answered automatically. Enable the local microphone to be muted when an incoming call is answered
automatically.
About this task
Only the Auto Answer Mute feature is enabled can this feature be available.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features.
• For your VC880/VC800/VC500/VC200/PVT980/PVT950, select More > Setting > Call Feature.
• On your CTP20, tap Setting > Basic.
2. Enable or disable Auto Answer Mute.
3. Save the change.
Related information
Auto Answer
Muting Auto-Dialed Calls
The Auto Dialout Mute feature allows the system to turn off the microphone after the other party answers
your call , so that the other party cannot hear you.
About this task
Note: The system is still muted after you hang up.
To Next Page
Loading...
