| Placing a Call | 198
• On your web user interface, go to Home.
Enter the number in the Enter Number field.
Select the desired call type and video call rate.
Click Video Call or Voice Call to place a video or voice call.
• On your VCS, select Dial.
Select the desired call type from the drop-down menu of Call Type.
Enter the number and press the right navigation key to select (video call) or (voice call).
Enter the number, select .
• On your CP960 conference phone, tap Dial.
Tap Auto, and select the desired call type from the drop-down menu.
Enter the number.
Tap Send to place a video call.
• On your CTP20, tap Dial.
In the lower right corner of the interface, tap Auto and select the desired call type from the drop-down
menu.
Enter the number, select .
Related tasks
Specifying the Video Call Rate
Related information
Account Polling
Placing a Call from the Search Result
You can enter search criteria on the dialing screen to find your desired contact or number, and then place
a call. Make sure search source list is configured and the call match feature is enabled. You can place a call
from the search result by using the web user interface, the remote control or the CP960 conference phone.
Procedure
1. Do one of the following:
• On your VCS, select Dial.
• On your CP960 conference phone, tap Dial.
2. Select the desired call type from the drop-down menu of Call Type.
In the lower right corner of the interface, tap Auto and select the desired call type from the drop-down
menu.
3. Enter the search criteria.
4. Select the desired search result and dial.
Related information
Search Source List in Dialing
Configuring Call Match
To Next Page
Loading...
