| Getting Started | 13
Hardware of PVT980 Codec
PVT980, targeted at large meeting room, is applicable to the meeting room with a rack or the lecture hall.
Possessing rich physical interfaces for audio and video connection, PVT980 can be connected to the 3rd-
party camera or access to the video matrix. In addition, it comes with the professional RCA-in/out interface
that integrates the mixer with the gooseneck microphone.
The following introduces the corresponding ports on PVT980.
Port Name Description
① LED Indicator Indicate different statuses of the system.
② Reset Key
Reset the system to factory defaults.
③ USB
• Connect to a USB flash drive.
Insert a USB flash drive for storing screen shots, the recorded videos and
captured packets. If multiple USB flash drives are connected, only the last
one can be identified.
• Insert a WF50 Wi-Fi USB Dongle for connecting to Wi-Fi or providing
wireless AP.
• Insert a BT42 Bluetooth USB Dongle for connecting to the CPW90-BT
Bluetooth wireless microphones.
• Insert a PSTN box CPN10 for connecting to the PSTN (Public Switched
Telephone Network).
④ Camera Port Connect to a third-party camera.
⑤ RCA In Connect to an audio input device via an RCA cable.
⑥ RCA Out Connect to an audio output device via an RCA cable.
⑦ Display Connect to a monitor for video images output.
⑧ VC Hub/Camera
• For wired content sharing, connect this port to the Codec port on the
VCH50 video conferencing hub.
• Connect this port to the Camera port on the VCC22 video conferencing
camera.
• If you need an audio device, connect this port to the Internet port on the
CP960 Conference phone.
⑨ Internet Connect to the network device.
To Next Page
Loading...
