Yealink VC880 - Muting the Microphone; Configuring Microphone Mute Mode

| Configuring Basic Settings | 118
Parameter Description Configuration Method
SecondScreen Icon
Enable or disable the system to
hide the secondscreen icon ( )
during a call.
• Show- the system displays
the secondscreen icon.
• Hide with UI- the system
displays the secondscreen
icon and then hide it after
five seconds.
• Hide- the system hides the
secondscreen icon.
Default: Hide with UI.
It is not applicable to VC200.
Web user interface
Muting the Microphone
You can mute the local microphone during a call, so that other parties cannot hear you.
Procedure
Do one of the following during a call:
• On your web user interface, go to Home > Mute.
• On your VCS:
For VC880/VC800/VC500/VC200/PVT980/PVT950, on your remote control, press .
On your VP59, press the MUTE key on the phone.
• On your CP960, tap one of the Mute keys.
• On your CP960 touch screen, tap the Mute key.
• On your CPE90, tap the Mute key.
• On your CPW90-BT, tap the Mute key.
If video conferencing system is muted, the icon will appear on the local video.
Configuring Microphone Mute Mode
By default, if you enable the mute mode on a single microphone (CPE90/CPW90/CPW90-BT), other
microphones will be muted synchronously. To avoid picking up unwanted sounds from other microphones,
you can choose to mute a single microphone only, and other microphones keep unmuted. This feature is
not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > Video & Audio.