| Managing the Directory | 193
Parameter Description Configuration Method
LDAP Display Name
Configure the contact attributes
displayed on the LCD screen.
Note: multiple contact attributes
should be separated by spaces.
Example: %cn
Web user interface
Protocol
Specify the protocol for the
LDAP server.
Note: Make sure the protocol
value corresponds with the
version assigned on the LDAP
server.
Web user interface
Match Incoming Call
Enable or disable the system
to match caller numbers with
LDAP contacts. If the match
is successful, the system will
display the caller name when
receiving an incoming call.
Default: Disabled.
Web user interface
Configuring Call Match
Enable or disable the system to
match outgoing call numbers
with LDAP contacts. If the match
is successful, the system will
display the contact name when
placing a call.
Default: Disabled.
Web user interface
LDAP Sorting Results
Enable or disable the system
to sort the search results in
alphabetical order or numerical
order.
Default: Disabled.
Web user interface
For more information about the string display method of the LDAP search filter, refer to http://
www.ietf.org/rfc/rfc2254.
Meeting Whitelist
You can add meeting whitelist. The users in the whitelist can join your conference call directly without
meeting password even if you have enabled the meeting password feature. Your system supports up to 100
whitelist records. This feature is not applicable to VP59.
• Adding Meeting Whitelist
• Deleting the Meeting Whitelist
To Next Page
Loading...
