Yealink VC880 - WPP20 Wireless Presentation Pod Usage; WPP20 Toolbar and Sharing Features

| Configuring Account Settings | 77
Configuring Account Settings
This chapter provides information on how to configure account settings.
• Setting SIP Account/SIP IP Call
• Setting H. 323 Account/H.323 IP Call
• Configuring the PSTN account
• Configuring the Video Conference Platform Account
• Logging out of the Video Conference Platform
Setting SIP Account/SIP IP Call
Yealink video conferencing system supports Session Initiation Protocol (SIP). If your server supports SIP, you
can make a voice/video call using the SIP account or IP address.
• Configuring SIP Accounts
• Configuring SIP IP Call
Configuring SIP Accounts
Yealink video conferencing system supports Session Initiation Protocol (SIP). If your server supports SIP, you
can configure a SIP account for your device, and other users can call you by dialing your SIP account.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > SIP Account.
• On your VCS, go to More > Setting > Advanced > SIP Account.
On your VP59, tap Setting > Advanced > SIP Account.
• On your CTP20, tap Setting > Advanced > SIP Account.
2. Configure and save the following settings:
Parameter Description Configuration Method
Line Active/SIP Account
Enable or disable SIP Accounts.
Note: the default value is On. If
it is set to disabled, the devices
cannot place or receive calls via
the SIP protocol.
Web user interface
Endpoint
CTP20
Username
The username of this SIP
account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Register Name
The registration name of this SIP
account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20