| Configuring Network Settings | 60
Viewing the Wireless Network Status
You can view the wireless network status.
Procedure
1. Do one of the following:
• On your web user interface, go to Network > Wi-Fi > Wi-Fi Status.
• On your VCS:
On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi > Wi-Fi
Status.
On your VC200, go to More > Network > Wi-Fi > Wireless Status.
On your VP59, tap Setting > Network & Connection > Wireless Network > Wireless Status.
• On your CTP20, tap Setting > Advanced > Network > Wireless Network > Wireless Status.
2. View the detailed wireless network information (for example, SSID or the signal strength).
Forgetting a Wireless Network
The device will automatically save the network that has been connected ever. To avoid the device
connected to a saved wireless network automatically, you can configure the device not to save it. Next time
you need enter the password to connect the network.
Procedure
1. Do one of the following:
• On your VCS:
On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.
On your VC200, go to More > Network > Wi-Fi > Wi-Fi.
On your VP59, tap Setting > Network & Connection > Wi-Fi.
• On your CTP20, tap Setting > Advanced > Network > Wireless Network.
2. Select the connected wireless network.
3. Select Forget the Network.
Disabling the Wi-Fi Feature
Procedure
1. Do one of the following:
• On your web user interface, go to Network > Wi-Fi > Wi-Fi Config > Wi-Fi.
• On your VCS:
On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.
On your VC200, go to More > Network > Wi-Fi > Wi-Fi.
On your VP59, tap Setting > Network & Connection > Wi-Fi.
• On your CTP20, tap Setting > Advanced > Network > Wireless Network.
2. Disable the Wi-Fi.
To Next Page
Loading...
