| Configuring Account Settings | 92
Logging into Zoom Cloud Platform
You can log into Zoom cloud platform and call into the permanent VMRs to join the video conferences with
other participants.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > VC Platform.
• On your VCS, go to More > Setting > Advanced > Video Conference Platform.
On your VP59, go to Setting > Advanced > Video Conference Platform.
• On your CTP20, go to Setting > Advanced > Video Conference Platform.
2. Configure and save the following settings:
Parameter Description Configuration Method
Cloud Account
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into the Zoom
Cloud Platform.
Web user interface
Endpoint
CTP20
Platform Type Select Zoom.
Web user interface
Endpoint
CTP20
Server/
Server Host
The IP address or the domain
name of the Zoom server.
Default: zoomcrc.com
Web user interface
Endpoint
CTP20
Transport
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are as
follows:
• UDP—it provides the best
transmission for SIP signaling.
• TCP—it provides a reliable
transmission for SIP signaling.
• TLS—it provides a safe
transmission for SIP signaling.
TLS is available only when the
device is registered on a SIP
server that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find the
service type and the port if
no server port is given.
Default: TCP.
Web user interface
To Next Page
Loading...
