| Getting Started | 31
Rear Panel of MSpeaker
Name Description
① Power Input It is used to connect MSpeaker to the power adapter.
② AUX In It is used to connect MSpeaker to VC800 Line Out Port
as an audio input.
LED Instructions
You can know the system status by viewing the LED light.
• LED Instructions of VC880/VC800/VC500/VC200/PVT980/PVT950
• Power Indicator LED of VP59
• Camera Indicator LED of VP59
• LED Instructions of VCC22 Video Conferencing Camera
• LED Instructions of CTP20
• Mute Indicator LED of CP960 Conference Phone
• Mute Indicator LED of CPE90 Wired Expansion Microphones
• LED Instructions of CPW90-BT Bluetooth Wireless Microphones
• LED Instructions of WPP20 Wireless Presentation Pod
LED Instructions of VC880/VC800/VC500/VC200/PVT980/PVT950
LED Status Description
Solid green The system is powered on.
Solid red The system is in sleep mode.
Flashing red The system is upgrading firmware.
Solid orange System exception (for example: network unavailable, update failure).
Off The system is powered off, or is not connected to the power adapter.
Power Indicator LED of VP59
LED Status Description
Solid red The phone is initializing.
To Next Page
Loading...
