Yealink VC880 - Configuring the Mode of Shutter Priority

| Configuring Camera Settings | 158
Parameter Description Configuration Method
Shutter
Configure the value of the shutter.
Value: 1/60, 1/90, 1/100, 1/125, 1/180,
1/250, 1/350, 1/500, 1/725 1/1000, 1/1500,
1/2000, 1/3000, 1/4000, 1/6000, 1/10000
Default: 1/100.
Web user interface
Endpoint
CTP20
Gain
Specify the value.
Note: the valid value is 1 to 15. The default
value is 2.
Web user interface
Endpoint
CTP20
WDR/Wide Dynamic
Range
Off or Specify the WDR. The value
represents the compression degree of the
dynamic range
Cameras with WDR technology can work
perfectly both in the bright and the dark
conditions and present clear images that
balances different lighting, so that you can
identify the details.
• Off-do not use WDR.
• 1~5
Default: 2.
Web user interface
Endpoint
CTP20
Configuring the Mode of Shutter Priority
Shutter priority allows you to choose a specific shutter speed while the camera adjusts the aperture to
ensure adequate exposure.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Exposure.
• On your VCS:
On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.
On your VC200, go to More > Setting > Video & Audio > Exposure.
• On your CTP20, tap Setting > Camera > Exposure.
2. Select Shutter Priority from the Exposure Mode drop-down menu.
3. Configure and save the following settings:
Parameter Description Configuration Method
Shutter
Configure the value of the shutter.
Valid Value: 1/60, 1/90, 1/100, 1/125, 1/180,
1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500,
1/2000, 1/3000, 1/4000, 1/6000, 1/10000
Default: 1/100.
Web user interface
Endpoint
CTP20